The surface connection of the wellbore is in a cross shape, a series of valves installed on the wellhead to control the flow of fluids from the well.

There are many types and designs to suit the wellsite and reservoir fluid conditions.

Wellhead pressure, fluid type, corrosive content, temperature and available space, are some of the parameters affecting the choice of valve design and specification.

• TRIPLEX and QUINTUPLEX PUMP

Well service pumps are used for fracturing, acidizing, cementing, well control, and circulating operations.

Function:

PROSERV TRIPLEX & QUINTUPLEX PUMP are the most versatile, time effective and economical solution for high pressure cutting, removing, cleaning, Descaling, Testing and Spraying.

PROSERV TRIPLEX & QUINTUPLEX PUMP are meant for high- and low-pressure volume applications. They give efficiency of more than 90% which is extremely high compared to other pumps.

The PROSERV Well Service Pump utilizes a power end plunger between the fluid end plunger and the crosshead. The power end plunger cycles through the power end only, and the fluid end plunger cycles through the fluid end only, no surface exposed to pump ever comes in contact with a power end seal.

For all fluid end plunger sizes, the power end plunger is always larger in diameter and better than centrifugal pumps.

Detail:

PROSERV TRIPLEX & QUINTUPLEX PUMP ranges from range of 1 (HP to 1000 HP), Pressure up to 2000 PSI and Flow rate up to 4000 LPM.

• VESSELS & ACCUMULATORS

The PROSERV Dual Vessel Power Fluid Cleaning Unit consists of a complete power fluid cleaning system packaged on a single skid for maximum accessibility in transporting and installing.

All equipment and controls are fully connected, ready for operation at any time.

Function:

PROSERV offer a complete line of floating piston and rodded transfer vessels.

These vessels can be used for Petroleum Core Flooding experiments, Supercritical Carbon Dioxide, PVT experiments, Catalysis, Polymerization, Oxidation, Hydrogenations, and other Reactor studies.

In an experiment where multiple fluids or phases are to be injected into the system, a series of accumulators are installed into the system and then only one metering pump is required to inject the fluids in sequence.

These vessels also protect the metering pumps from highly corrosive or high brine liquids, so that the precision metering pump is not damaged.

Features:

These vessels have several unique features.

The bronze end caps are used to prevent friction between similar metals. The seal and end plug design allow for hand tight operation of the vessel.

This feature allows easy assembly and disassembly of the vessel for cleaning and examination.

The piston material can be Teflon, which prevents any galling from occurring between the piston and the honed cylinder wall.

• High Pressure Pipe Cleaning Package

PROSERV offers General parts and reliable ultra-high-pressure cleaning of pipes under extreme conditions.

Widely different surfaces and materials must be cleaned regularly so that continuous processes and safety are ensured during operation.

Sieve and Filter Cleaning

The functional capability of strainers and filters depends essentially on the state of their surfaces. They must therefore be constantly cleaned.

Pipe Cleaning

Pipes have important functions everywhere in industry. To fulfil these functions, their flow continuity must be ensured.

• Liquid Flow Meter for Clean Gas

PROSERV provides best liquid flow meters for gas and oil filtering procedures.

Liquid flow meters can provide high accuracy and good choice when ruggedness is needed. They can perform well under extreme conditions.

Product Function:

The meters provide highly accurate and repeatable measurement of oils, water and some chemicals.

Turbine flow meters excel at measuring clean, steady and medium-to-high speed flows of low-viscosity fluids, particularly those found in “pump-intensive” oil field environments.

They maintain measurement accuracy and mechanical integrity in the corrosive and abrasive fluids commonly employed in oil and gas production and many other industries.